Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
The ASR-2000 series is an AC+DC power supply that provides rated power output not only at AC output but also at DC output.The ASR-2000 output modes have 9 modes to choose from including 1) AC-Int Mode, 2) DC-Int Mode, 3) AC+DC-Int Mode, 4) External AC Source Mode, 5) External AC/DC Source Mode, 6) External AC/DC Source Mode, 7) External AC/DC Source Mode, 8) External AC/DC Source Mode, 9) External AC/DC Source Mode, 9) External AC/DC Source Mode. AC and DC power output mode (AC+DC-INT Mode), 4) External AC signal source mode (AC-EXT Mode), 5) External AC and DC signal source mode (AC+DC-EXT Mode), 6) External AC signal iteration mode (AC-ADD Mode), 7) External AC and DC signal iteration mode (AC+DC-ADD Mode), 8) External AC signal iteration mode (AC-ADD Mode), 9) External AC signal output mode (AC-ADD Mode), 10) External AC signal output mode (AC-ADD Mode), 11) External AC signal output mode (AC-ADD Mode), 12) External AC signal output mode (AC-INT Mode), 13) External AC signal output mode (AC-ADD Mode). , 8) External AC signal synchronization mode (AC-SYNC Mode), 9) External AC/DC signal synchronization mode (AC+DC-SYNC Mode).
In order to satisfy different electronic component development, automotive electronics and home appliance testing, ASR-2000 series
ASR-2000 Series Introduction https://v.youku.com/v_show/id_XNDYyMTc4NTcwNA==.html
ASR-2000 series PPT presentationhttps://v.youku.com/v_show/id_XNDYyMjAyNjIzNg==.html
ASR-2000 Series Firmware Upgradehttps://v.youku.com/v_show/id_XNDYyMjA2MzE5Ng==.html
ASR-2000 Series Restore Factory Settingshttps://v.youku.com/v_show/id_XNDYyMjA2MTY1Ng==.html
ASR Demo Videohttps://v.youku.com/v_show/id_XNTA0MjgxNjk3Ng==.html
Quick Selection
| model number | output power | output frequency | output voltage | Maximum current | Standard Interface |
| ASR-2050 | 500VA | 1Hz-999Hz | AC 350V/DC ±500V | 2.5A/5A | USB/LAN |
| ASR-2100 | 1000VA | 1Hz-999Hz | AC 350V/DC ±500V | 5A/10A | USB/LAN |
| Detailed specifications | |||
| ASR-2050(R) | ASR-2100(R) | ||
| Rated Input (AC) | |||
| Normal Input Voltage | 100 Vac ~ 240 Vac | 100 Vac ~ 240 Vac | |
| Input Voltage Range | 90 Vac to 264 Vac | 90 Vac to 264 Vac | |
| phase (waves) | single-phase, two-wire system | single-phase, two-wire system | |
| Input frequency range | 47 Hz to 63 Hz | 47 Hz to 63 Hz | |
| Maximum power consumption | ≤800 VA | ≤1500 VA | |
| Power factor*1 | 100Vac | 0.95 (typ.) | 0.95 (typ.) |
| 200Vac | 0.90 (typ.) | 0.90 (typ.) | |
| Maximum Input Current | 100Vac | 8 A | 15 A |
| 200Vac | 4 A | 7.5 A | |
| *1 Output voltage is 100V/ 200V (100V/200V steps), maximum current, and load power factor is 1. | |||
| AC mode rated output (AC rms) | |||
| input voltage | Setting range*1 | 0.0 V to 175.0 V / 0.0 V to 350.0 V | |
| Setting resolution | 0.1 V | ||
| Accuracy*2 | ±(0.5 % of set + 0.6 V / 1.2 V) | ||
| Output phase | single-phase, two-wire system | ||
| Maximum current*3 | 100 V | 5 A | 10 A |
| 200 V | 2.5 A | 5 A | |
| Maximum peak current*4 | 100 V | 20 A | 40 A |
| 200 V | 10 A | 20 A | |
| power capacity | 500 VA | 1000 VA | |
| frequency | Setting range | AC mode: 40.00 Hz to 999.9 Hz, AC+DC mode: 1.00 Hz to 999.9 Hz | |
| Setting resolution | 0.01 Hz (1.00 to 99.99 Hz), 0.1 Hz (100.0 to 999.9 Hz) | ||
| accurate | 45 Hz to 65 Hz: 0.01% of set value, 40 Hz to 999.9 Hz: 0.02% of set value | ||
| Stability*5 | ± 0.005% | ||
| in-phase output | 0.0° to 359.9° variable (set resolution 0.1°) | ||
| DC offset*6 | ± within 20 mV (TYP) | ||
| *1. 100V/200V gearing | |||
| *2. For 17.5V to 175V/35V to 350V output voltage, sine wave, 45 Hz to 65 Hz output frequency, no load, DC voltage setting 0V (AC+DC mode), 23°C±5°C | |||
| *3. For output voltages from 1V to 100V/2V to 200V, when the output voltage is 100V to 175V/200V to 350V, it is limited by the power capacity. | |||
| *4. Capacitor input rectified load, limited by maximum current. | |||
| *5. For 45Hz to 65Hz, output rated voltage, resistive load without load and maximum current, and operating temperature. | |||
| *6. In AC mode and with output voltage set to 0V. | |||
| DC Mode Rated Output | |||
| input voltage | Setting range*1 | -250V～+250V/-500V～+500V | |
| Setting resolution | 0.1 V | ||
| Accuracy*2 | ±(|0.5 % of set| + 0.6 V / 1.2 V) | ||
| Maximum current*3 | 100 V | 5 A | 10 A |
| 200 V | 2.5 A | 5 A | |
| Maximum peak current*4 | 100 V | 20 A | 40 A |
| 200 V | 10 A | 20 A | |
| power capacity | 500 W | 1000 W | |
| *1. 100V/200V gearing | |||
| *2. For output voltages of -250 V to -25 V, +25 V to +250 V/-500 V to -50 V, +50 V to +500 V, no load, AC voltage set to 0 V (AC + DC mode), 23°C ± 5°C. | |||
| *3. When the output voltage is 1.4V to 100V/2.8V to 200V, it is limited by the power capacity when the output voltage is 100V to 250V/200V to 500V. | |||
| *4. within 5ms, subject to maximum current. | |||
| Output Voltage Stability | |||
| Line Adjustment*1 | ≤±0.2% | ||
| Load Adjustment*2 | 0.15% @45 - 65Hz; 0.5% @DC, all other frequencies (0 to 100%, via output terminal) | ||
| Ripple noise*3 | 0.7 Vrms / 1.4 Vrms (TYP) | ||
| *1. Power input voltage is 100V, 120V or 230V, no load, rated output. | |||
| *2. For output voltages from 75 V to 175 V/150 V to 350 V with a load power factor of 1, the output current is gradually changed from 0 A to the maximum current (or its reverse) using the output terminals on the rear panel. | |||
| *3. For the 5 Hz to 1 MHz section in DC mode, use the output terminals on the rear panel. | |||
| Output voltage waveform distortion rate, output voltage response time, efficiency | |||
| Output voltage waveform distortion rate*1 | ≤0.5 % | ||
| Output voltage response time*2 | 100 us (TYP) | ||
| Efficiency*3 | ≥70% | ||
| *1. at an output voltage of 50V to 175V/100V to 350V with a load power factor of 1 and in AC and AC+DC modes. | |||
| *2. For an output voltage of 100 V/200 V and a load power factor of 1, relative to a stepwise change from an output current of 0 A to a maximum current (or its inverse); the output voltages of 10% to 90%. | |||
| *3. For AC mode, at an output voltage of 100 volts/ 200 volts, maximum current, load power factor of 1, sine wave only. | |||
| Measured value display | |||
| Voltage RMS, AVG value*1 | resolution (of a photo) | 0.1 V | |
| Accuracy*2 | 45Hz to 65Hz, DC: ± (0.5 % reading + 0.3V/0.6V), 40Hz to 999.9Hz: (0.7% reading + 0.9V/1.8V) | ||
| peak value | resolution (of a photo) | 0.1 V | |
| accurate | 45Hz to 65Hz, DC: ±(|2% reading|+1V/2V) | ||
| Current RMS, AVG Value | resolution (of a photo) | 0.01 A | 0.01A |
| Precision*3 | 45Hz to 65Hz, DC:±(0.5% reading + 0.02A/0.02A) | 45Hz to 65Hz, DC:±(0.5% reading + 0.04A/0.02A); | |
| 40 Hz to 999.9 Hz:±(0.7% reading + 0.04A/0.04A) | 40 Hz to 999.9 Hz:±(0.7% reading + 0.08A/0.04A) | ||
| peak value | resolution (of a photo) | 0.1A | 0.1A |
| Precision*4 | 45Hz to 65Hz, DC:±(|2% reading|+0.2A/0.1A) | 45Hz to 65Hz, DC:±(|2% reading|+0.2A/0.1A) | |
| Power Active (W) | resolution (of a photo) | 0.1/1W | 0.1/1W |
| Precision*5 | ± (2% reading + 0.5W) | ± (2% reading + 1W) | |
| Apparent (VA) | resolution (of a photo) | 0.1/1VA | 0.1/1VA |
| Accuracy*5*6 | ± (2% reading + 0.5VA) | ± (2% reading + 1VA) | |
| Reactive (VAR) | resolution (of a photo) | 0.1/1VAR | 0.1/1VAR |
| Precision*5*7 | ±(2% reading + 0.5VAR) | ±(2% reading + 1VAR) | |
| Load power factor | realm | 0.000 to 1.000 | 0.000 to 1.000 |
| resolution (of a photo) | 0.001 | 0.001 | |
| load crest factor | realm | 0.00 to 50.00 | 0.00 to 50.00 |
| resolution (of a photo) | 0.01 | 0.01 | |
| harmonic voltage (physics) | realm | Base wave up to 40th | Base wave up to 40th |
| Effective value (RMS) | full scale | 175v/350v,100% | 175v/350v,100% |
| Percentage (%) | resolution (of a photo) | 0.1V, 0.01% | 0.1V, 0.01% |
| (AC-INT and 50/60Hz only) | Precision*8 | Up to 20th ± (0.2% reading + 0.5V/1V) | Up to 20th ± (0.2% reading + 0.5V/1V) |
| 20th to 40th ± (0.3% reading + 0.5V/1V) | 20th to 40th ± (0.3% reading + 0.5V/1V) | ||
| harmonic current (e.g. electric current) | realm | Base wave up to 40th | Base wave up to 40th |
| Effective value (RMS) | full scale | 5A/2.5A,100% | 10A/5A,100% |
| Percentage (%) | resolution (of a photo) | 0.01A,0.01% | 0.01A,0.01% |
| (AC-INT and 50/60Hz only) | Precision*3 | Up to 20th ± (1% reading + 0.1A/0.05A) | Up to 20th ± (1% reading + 0.2A/0.1A) |
| 20th to 40th ± (1.5% reading + 0.1A/0.05A) | 20th to 40th ± (1.5% reading + 0.2A/0.1A) | ||
| *1. Voltage display is set to RMS value in AC/AC+DC mode and average value in DC mode. | |||
| *2. AC mode: Output voltage 17.5V to 175V/35V to 350V and 23°C±5°C. DC mode: Output voltage 25V to 250V/50V to 500V and 23°C±5°C. | |||
| *3. Output current between 5% and 100% of maximum current, 23°C ± 5°C. | |||
| *4. In AC mode, the output current is in the range of 5% to 100% of the maximum peak current, and in DC mode, the output current is in the range of 5% to 100% of the maximum instantaneous current, at 23°C ± 5°C. The accuracy of the peak value is in the form of a DC waveform or sinusoidal waveform. | |||
| *5. For output voltages greater than or equal to 50 V, output currents in the range of maximum currents 101 TP3T to 1001 TP3T, DC or output frequencies of 45 Hz to 65 Hz, 23°C ± 5°C. | |||
| *6. Apparent power and reactive power are not displayed in DC mode. | |||
| *7. Reactive power is used for loads with a power factor of 0.5 or lower. | |||
| *8. Output voltage range 17.5V to 175V/35V to 350V, 23°C±5°C. | |||
| (sth. or sb) else | |||
| safeguard | OCP, OTP, OPP, FAN Fail | ||
| demonstrate | TFT-LCD, 4.3 inch | ||
| memory function | 10 groups of storage and retrieval settings | ||
| arbitrary waveform | Number of stores | 16 (flash memory) | |
| Waveform length | 4096 points. | ||
| connector | Standard USB | Type A: Host, Type B: Slave, Speed: 1.1/2.0, USB-CDC | |
| LAN | MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask | ||
| external control | External signal input; external control I/O | ||
| Optional GPIB | SCPI-1993, IEEE 488.2 compliant interface | ||
| RS-232C | Conforms to EIA-RS-232 specifications | ||
| electrical insulation resistance | 500 Vdc, ≥30 MΩ | ||
| Input to chassis, output to chassis, input to output | |||
| pressure resistance | 1500 Vac, 1 minute | ||
| Input to chassis, output to chassis, input to output | |||
| EMC | EN 61326-1 (Class A) | ||
| EN 61326-2-1/-2-2 (Class A) | |||
| EN 61000-3-2 (Class A, Group 1) | |||
| EN 61000-3-3 (Class A, Group 1) | |||
| EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11 (Class A, Group 1) | |||
| EN 55011 (Class A, Group1) | |||
| surety | EN 61010-1 | ||
| matrix | operating environment | Indoor use, overvoltage category II | |
| Operating Temperature Range | 0 °C to 40 °C | ||
| Storage temperature range | -10 °C to 70 °C | ||
| Operating humidity range | 20 %RH to 80 % RH (non-condensing) | ||
| Storage Humidity Range | ≤90 % RH (non-condensing) | ||
| high degree | Up to 2000m | ||
| Size & Weight | ASR-2000 : 285(W)×124(H)×480(D) (excluding protruding parts); approx. 11.5 kg | ||
| ASR-2000R : 213(W)×124(H)×480(D) (excluding protruding parts);approx. 10.5 kg | |||
replacement (parts)
CD ROM (User's Manual, Programming Manual), Safety Guide, Power Cord, Power Terminal Cover Assy.
Remote Sense Terminal Cover Set, GTL-123 Test Lead, GTL-246 USB Cable
optional
Opt01:RS-232+GPIB communication function
Opt02: European output socket (ASR-2000 only)
GET-003 Expanded Universal Power Outlet
GET-004 Extended European Power Outlet
GRA-439-E Rack Mount Kit (EIA)
GRA-439-J Rack mounting kit (JIS)
GTL-232 RS-232C cable, approx. 2m
GTL-258 GPIB cable, approx. 2m
ASR-001 Air Intake Filter
Ordering Information
ASR-2050 500VA Programmable AC/DC Power Supply
ASR-2100 1000VA Programmable AC/DC Power Supply
ASR-2050R 500VA Programmable AC/DC Power Supply
ASR-2100R 1000VA Programmable AC/DC Power Supply
