What are the advantages of Trueform technology?

common problems 4670

Its advantages include:

Ultra-low jitter
Trueform function/arbitrary waveform generators have jitter as low as 1 ps and excellent edge stabilization. You can even use them as system clocks for timing and triggering other instruments. With better jitter performance, you can locate edges more accurately, which helps reduce timing errors in your circuit designs.

Ultra-low harmonic distortion
With a total harmonic distortion of only 0.03%, the Trueform waveform generator has 5 times the fidelity of other Yesotech generators. The pure, spurious-free signal introduces no noise or artifacts. During measurements, you see pure design features, not waveform generator features.

no overlap
Use the Trueform Arbitrary Waveform function to define waveforms of various shapes and lengths. Play back the signal at a specified sample rate without missing transient anomalies that are critical to device reliability. Trueform does not miss any points and does not create aliasing.

Previous. NEXT STORY.

Recommended

  • How do I measure the frequency?

    300

    How to measure frequency? Measurable Devices, Measurement Methods, and Precautions In everyday life, many people say they don't know much about the frequencies of electrical appliances. However, some electrical appliances have specific compatible frequencies, and using electricity at a frequency that is not compatible with the product may lead to malfunctions, fires, and other risks. In addition, in industrial equipment, there are electrical designed to operate at fixed or variable frequencies...

    View Full Version
  • How do I connect two DC power supplies in series?

    463

    To connect two DC power supplies in series, connect the positive terminal of the first power supply to the negative terminal of the second power supply to form a "daisy-chain" connection, where the series voltage is the sum of the voltages of the two power supplies. To connect two DC power supplies in series, proceed as follows: Note that the voltage of the load should be equal to or higher than the sum of the voltages of the two power supplies to prevent damage to the load or power supply. In addition, the load's rated...

    View Full Version
  • How do I measure voltage?

    471

    How do I measure voltage? If you use a multimeter, anyone can measure it easily ■ Summary Since voltage is not visible to the naked eye, it is not possible to confirm "how much voltage is flowing through a circuit at a glance". However, the circuits of electronic devices have a set voltage for normal operation, and if the voltage is too high, it may lead to product malfunction or personal injury. In addition, ...

    View Full Version
  • What are spectrum analyzers used for?

    622

    Spectrum analyzers measure the amplitude of an input signal versus frequency over the entire frequency range to determine the power of the signal. Spectrum analyzers are capable of performing tests such as noise figure and signal-to-noise ratio (SNR) to characterize the performance of a device and its contribution to overall system performance. For more information, see the application guide Spectrum Analysis Basics. ,

    View Full Version

Hello!sign in

Click to cancel reply
    Expand More

    Product consultation and purchase:18218718851

    I already understand