Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
brief introduction
ZC2683F Insulation Resistance Tester is a measurement instrument for electronic components, dielectric materials, equipment and wire and cable insulation performance. Based on other insulation resistance testers in the same series, the instrument further improves the interface link and programming debugging, as well as the stability of long-time testing, so that it is more suitable for automated production line testing requirements. Rich interface, suitable for a variety of application scenarios, for stable and rapid continuous production escort.
Performance Characteristics
- Chinese and English operation interface
- Insulation resistance, leakage current dual display
- zeroing function
- Contact check function for capacitive materials
- Programmable sequential test mode
- Quick test: 30ms
- 6 ranges, manual or automatic mode
- Four-step comparison function: three passes, one fails
- Measurement result data can be saved on a USB flash drive, and the system firmware can be upgraded via the USB flash drive.
- Foot switch trigger function (option)
- Supports MODBUS protocol
Technical indicators
| model number | ZC2683F | |
| resistive | Measurement range | 100KΩ-10TΩ |
| accurate | Voltage ≥10V and 1>10nA ±2% | |
|
amps |
Test Range |
Range 1: 100uA~1mA, input internal resistance 10kΩ |
| Range 2: 10uA~100uA, input internal resistance 10kΩ | ||
| Range 3: 1uA~10uA, input internal resistance 10kΩ | ||
| Range 4: 100nA~1uA, input internal resistance 10kΩ | ||
| Range 5: 10nA~100nA, input internal resistance 1MΩ | ||
| Range 6: 1nA~10nA, input internal resistance 1MΩ | ||
| input voltage | Test Range | 10V-1000V |
| accurate | Voltage ≥10V 1% ±1V | |
| Current Limit | 10mA | |
| switchgear | Turn on or off manually on the front panel, or via built-in timer control or remote control | |
| charging time | 0~999s, programmable | |
| Measurement delay | 0~999s, programmable | |
| test speed | Fast: single measurement time ≤ 30ms Slow: single measurement time ≤ 60ms | |
| Comparator Functions | Fourth gear: three passes and one fails | |
| Measurement range | Automatic, Hold | |
| memory (unit) | External USB flash drive | |
| standard interface | RS232C, USB HOST, USB DEVICE, HANDLER | |
| power wastage | <50VA | |
| volumetric | 270mm(W)*110mm(H)*370mm(D) | |
| weights | 4kg | |
