Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke 369/CN and 369 FC/CN Microamp True RMS Leakage Current Clamp Meters
Reduced downtime - find leakage currents without removing equipment from the production line
The Fluke 369 FC True RMS Leakage Current Clamp Meter helps users continuously detect, archive, record and compare leakage current readings to prevent unplanned downtime and detect GFCI and RCD intermittent trips in a timely manner, all without removing the equipment from the production line.
The Fluke 369 FC has an extra-large 61 mm jaw for use with extra-large wires. The clamp meter jaws are fully shielded to accurately capture very weak leakage signals while minimizing external electromagnetic interference.
The 369 FC is also available with wireless data connectivity through Fluke Connect. As part of Fluke Connect®, the industry's largest software system, and with more than 40 wireless test tools, the 369 FC lets you continuously track changes in leakage current to help pinpoint potential faults and prevent small problems from causing serious failures.
*In addition to the FC and related functions, the 369 has the same electrical performance and measurement functions as the 369 FC.
Product Specifications: Fluke 369/CN and 369 FC/CN Microamp True RMS Leakage Current Clamp Meter
| Electrical specifications | ||
| measurement function | alternating current (electricity) | |
| AC current range | 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A | |
| Range Selection | mA / A: manual selection 3 mA / 30 mA / 300 mA: automatic selection 3 A / 30 A / 60 A: automatic selection |
|
| Range/Resolution | 3 mA¹ / 0.001 mA | |
| 30 mA / 0.01 mA | ||
| 300 mA / 0.1 mA | ||
| 3 A / 0.001 A | ||
| 30 A / 0.01 A | ||
| 60 A / 0.1 A | ||
| Accuracy - activate filter (40 to 70 Hz), deactivate filter (40 to 1 kHz)² | 3 mA - 30 A 60 A |
1% + 5 bits 2% + 5 bits |
| frequency | 40 Hz to 1 kHz | |
| crest factor | ="3" | |
| Accuracy is valid for one year after calibration. Accuracy is expressed as ± (1 TP3T reading + digits) for reference temperature conditions of 23 ± 5 °C and a maximum relative humidity of 801 TP3T. ¹Minimum value is 10 μA true RMS. ² Exceeds TC / °C 18 °C to 28 °C, 0.02 + 1 |
||
| Airframe Features | ||
| Display (LCD) | Digital readout: 3300 characters | |
| Display update rate | 4 times/second | |
| Maximum measurable wire diameter | 61 mm | |
| sizes | 257 x 116 x 46 mm | |
| weights | 600 g | |
| batteries | 2 AA, IEC LR6, NEDA 15A, Alkaline | |
| Battery life | Estimated battery life of over 150 hours without backlight or spotlight | |
| automatic shutdown | Clamp meter will automatically shut down after 15 minutes of inactivity. | |
| Safety and environmental norms | ||
| General security | IEC 61010-1: Pollution class 2 | |
| Measurement Safety | IEC 61010-2-032: CAT III 600 V / CAT IV 300 V | |
| operating temperature | -10 °C to +50 °C | |
| storage temperature | -40 °C to +60 °C | |
| Operating humidity | Non-condensing (<10 °C) | |
| 90% Relative humidity (10 °C to 30 °C) | ||
| 75% Relative humidity (30 °C to 40 °C) | ||
| 45% Relative humidity (40 °C to 50 °C) | ||
| protection class | IEC 60529: IP30 (jaws closed) | |
| Working altitude | 2000 m | |
| Storage altitude | 12000 m | |
| Current Sensor Action Category | IEC 61557-13: Class 1, ≤100 A/m | |
| Electromagnetic Compatibility (EMC) | ||
| international standard | ||
| IEC 61326-1 | Industrial Electromagnetic Environment | |
| CISPR 11 | Group 1, category B | |
| Group 1 | The need to generate and/or use RF energy associated with conducted energy within the device is essential for the device's own internal functioning. | |
| Level B | The equipment is suitable for household appliances and any equipment directly connected to the low voltage network supplying residential buildings. The emission levels specified in the CISPR 11 requirements may be exceeded when this equipment is connected to the test target. Korea (KCC): Class A equipment (industrial broadcasting and communications equipment) |
|
| Grade A | This product meets the requirements for industrial electromagnetic equipment and the seller or user should take care. This equipment is designed for use in a commercial environment, not a residential environment. USA (FCC): 47 CFR 15 Part B. This product is considered tax-exempt equipment under Section 15.103. |
|
Model: Fluke 369/CN and 369 FC/CN Microamp True RMS Leakage Current Clamp Meter
Fluke 369 FC
Fluke 369 FC Leakage Current Clamp Meter
Fluke 369 FC/CN Microampere True RMS Leakage Current Clamp Meter Random Accessory
- Leakage current clamp meter
- Soft Carrying Case
- Safety Manual
- Batteries: 2 AA
