Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke T6-1000 PRO Non-Contact Current and Voltage Tester
Display voltage and current on the same screen
The T6-1000 PRO non-contact current and voltage tester measures AC voltages up to 1000 V and AC currents up to 200 A. Measurements are made through the fork jaws, eliminating the need to connect the test lead to a live body. Ground the black wire with the included large-load alligator clips, place the wire in the jaws, and view both voltage and current. For use with sizes up to AWG 4/0 (120 mm).2) wires, with measured AC currents and AC voltages of up to 200 A and 1000 V respectively, even with gloves on. This will change the way you work.
Key Function
- Simultaneous display of voltage and current - save time by viewing voltage and current measurements at the same time when troubleshooting motors, pumps or other equipment
- Visual Continuity™ - If a continuity check is performed, the screen automatically turns green when the buzzer sounds. This feature is useful in situations where the buzzer is too loud to be heard, ear protection is worn, or the light is too low to see the screen, Visual Continuity makes the results of continuity checks reliable.
- True RMS - accurate voltage and current measurements, even when measuring complex signals.
- FieldSense™ technology to measure AC voltage, current and frequency without touching a live body
Other capacities
- 1 to 1000 V AC or DC
- 0.1 to 200 A AC
- Resistance: 1 Ω to 100 kΩ
- Frequency measurement range 45 Hz to 66 Hz (via fork)
- Suitable for most wire sizes up to AWG 4/0 (17.8 mm/0.7" jaw opening)
- The HOLD button temporarily freezes the on-screen reading for easy viewing.
- Backlit display for easy reading
- Optional Fluke TPAK Magnetometer Hook for Easy Handling
- Two-year standard warranty; can be extended to 4 years if product is registered within 45 days of purchase*
Product Specification: Fluke T6-1000 PRO Non-Contact Current and Voltage Tester
| functionality | ||
| FieldSense AC Voltage | Test Leads Required | clogged |
| range (of scales or measuring equipment) | 1000 V | |
| resolution (of a photo) | 1 V | |
| accurate | ± (3 % + 3 counts) 45 Hz - 66 Hz[1] [2] | |
| FieldSense AC Current | Test Leads Required | clogged |
| range (of scales or measuring equipment) | 200.0 A | |
| resolution (of a photo) | 0.1 A | |
| accurate | ± (3 % + 3 words) 45 Hz - 66 Hz | |
| FieldSense Frequency (Hz) | Test Leads Required | clogged |
| range (of scales or measuring equipment) | 45 Hz - 66 Hz | |
| resolution (of a photo) | 1 Hz | |
| accurate | ± (1 % + 2 words) | |
| alternating current | Test Leads Required | be |
| range (of scales or measuring equipment) | 1000 V | |
| resolution (of a photo) | 1 V | |
| accurate | ± (1.5 % + 2 words) 45 Hz - 66 Hz | |
| dc voltage | Test Leads Required | be |
| range (of scales or measuring equipment) | 1000 V | |
| resolution (of a photo) | 1 V | |
| accurate | ± (1 % + 2 words) | |
| resistive | Requires test leads (all ranges) | be |
| range (of scales or measuring equipment) | 2000 Ω | |
| resolution (of a photo) | 1 Ω | |
| range (of scales or measuring equipment) | 20.00 kΩ | |
| resolution (of a photo) | 0.01 kΩ | |
| range (of scales or measuring equipment) | 100.0 kΩ | |
| resolution (of a photo) | 0.1 kΩ | |
| Accuracy (all ranges) | ± (1 % + 2 counts) | |
accurate[1]: ± ([% of reading] + [least significant digit word value]). Accuracy applies for one year after calibration at operating temperatures from 18 °C to 28 °C (64 °F to 82 °F) and relative humidity to 90 %. AC Conversion: AC coupled, RMS response.
accurate[2]: FieldSense is specified for 16V to 1000V.
| General technical indicators | |
| calibrations | 1 year calibration cycle |
| sizes | 61 mm x 259 mm x 43 mm |
| weights | 0.35 kg (0.78 lb) |
| Jaw Opening | 17.8 mm (0.7") |
| temp Work: When stored: |
-10 °C to +50 °C (14 °F to 122 °F) -30 °C to +60 °C (-22 °F to +140 °F) |
| height above sea level Work: When stored: |
2,000 meters (6,562 feet) 10,000 meters (32,808 feet) |
| relative humidity | 0 % to 90 %, 5 °C to 30 °C (41 °F to 86 °F) 0 % to 75 %, 30 °C to 40 °C (86 °F to 104 °F) 0 % to 45 %, 40 °C to 50 °C (104 °F to 122 °F) |
| batteries Type: Hours of work: |
2x AA (IEC LR6) 360 hours of continuous operation, typically 200 hours with FieldSense capability |
| temperature coefficient | 0.1 x (specified accuracy)/°C at 28 °C (82.4 °F) |
| surety General: surveying T6-1000 PRO: |
IEC 61010-1: Pollution class 2IEC 61010-2-032: CAT IV 600 V / CAT III 1000 V |
| electromagnetic compatibility | IEC/EN 61326-1: Portability |
Model: Fluke T6-1000 PRO Non-Contact Current and Voltage Tester
Fluke T6-1000 PRO
Fluke T6-1000 PRO Non-Contact Current and Voltage Tester
Included:
- Pair of pens mounted on the meter body (removable and replaceable), with removable 4mm probe caps
- Black AC285 SureGrip™ Alligator Clip
- H-T6 set
- user documentation
Fluke T6-1000 PRO/HS1
Model: Fluke T6-1000 PRO HS1 Clamp Meter
Included:
- One Fluke T6-1000 PRO Clamp Meter
- A pair of pens (removable and replaceable) mounted on the body of the clamp meter, with removable 4mm probe caps.
- Black AC285 SureGrip™ Alligator Clip
- H-T6 set
- IPHS1 Phillips head insulated screwdriver
