Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Compensates for voltage drop caused by wiring from the output terminals to the load terminals of the PAV series.
one's special ability or strong points
Communication interfaces are standard
A new classic in high-performance switching test power supplies
Wide variety of external controls and applications - Analog controllers and monitoring terminals are available for a variety of applications.
remotely sensed
Remote monitoring of output voltage and current and CV/CC signaling
In proportion to the output voltage/current of the PAV series, 0 to 5 V or 0 to 10 V will be output, and the operation status will be HIGH in CV constant voltage mode and LOW in CC constant current mode.
Parallel operation (single control operation)
Max can connect up to 6 PAV series in parallel to increase the output current.
Output voltage and current control by external voltage
The output voltage as well as the output current can be controlled by connecting the voltage to the PAV series from outside.
Output ON/OFF control
ON/OFF of the PAV series can be externally controlled.
daisy chain connection
Multiple PAV series products are used to construct a multiple power supply system, and when one of the power supplies fails, all of its constituent power supply outputs can be stopped.
tandem operation
Max can connect two PAV series products in series to increase the output voltage. A dual output structure is also available.
PS_OK signal
Abnormalities are notified via TTL outputs when the protection function operates. The PS_OK level is HIGH in the normal operation state.
Output voltage and current controlled by external resistors
The output voltage as well as the output current can be controlled by external control of the PAV series.
USB/RS232C/RS485 control
The USB/RS232C/RS485 interfaces are standard on the PAV series, and Max can connect up to 31 PAV series for control. In addition, the USB/RS232C/RS485 interfaces are built into the main unit of the PAV series.
Parallel operation / synchronized operation
Parallel operation (PAV series with the same rating) and synchronized operation (synchronized triggering) are possible. Furthermore, integration is realized by using the optional cabinet adapter KRA2-PAV (Max. installation of 6 units) and the half-size integrated housing CC01-PAV (Max. installation of 3 units), which makes cabinet assembly and removability easier.
Parallel and synchronized operation is possible even without the optional KRA2-PAV and CC01-PAV.
Example of use of optional parts
Max up to 4.8kW (Max 6 units)
On a 19-inch general purpose cabinet
Integration of 3 power supplies
Use as a desktop power supply
Product Lineup
