Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
● 频带宽：DC～10 MHz
:: High S/N ratio: waveform observation possible at the mA level
● Direct input to the oscilloscope's BNC terminal
● Waveforms can be observed in the memory recorder.
● Using a dedicated power supply option, power supplies other than oscilloscopes can be provided.
※Please use it on the main unit of a measuring instrument with a high input impedance of 1 MΩ or more.
Basic parameters (accuracy guaranteed for 1 year)
| bandwidth | DC～10MHz（-3dB） |
|---|---|
| rising time | 35ns以下 |
| static (in a signal) | 最大25mA rms或更小（带宽限制到20MHz） |
| Continuous maximum input range | 150A rms（根据频率设定间隔时间） |
| Maximum peak current | 300A peak（非连续） 500A peak（脉冲宽度30 μs以下） |
| Amplitude accuracy | ±1.0% rdg. ±1mV(DC, 45-66Hz, 30A rms or less) ±2.0% rdg.(DC, 45-66Hz, 30A rms 50A peak or less) |
| Amplitude accuracy | ±1.0% rdg. ±1mV（DC, 45～66Hz, 0〜150 A） ±2.0% rdg.（DC, 45～66Hz, 150 A〜300 A peak） |
| Output Voltage Rate | 0.1V/A ※输出部内置。 |
| Wire under test | Φ20 mm |
| power supply | ±12V ±1V,5.5VA max. |
| Volume and weight | 176W×69H×27D mm,500g,传感器电缆2m（BNC端子）,电源电缆1m |
| attachment (email) | Soft case × 1, instruction manual × 1 |
