Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Coil products (such as transformers, motors, etc.) due to the winding materials, magnetic materials, skeleton, processing technology and other factors will produce a coil between the layers, turns and pins, such as insulation performance degradation.TH2882A series of impulse coil testers is a new generation of coil products using high-speed sampling technology to develop insulation test instruments, can provide test solutions for most coil products. The TH2882A stores the sampled waveforms of standard coils in the instrument, compares the measured waveforms with the standard waveforms during testing, and determines the advantages and disadvantages of the coils under test according to the set criteria (area, area difference, phase difference, corona, etc.).The TH2882AS is mainly used for testing all kinds of three-phase, three-wire or three-phase, four-wire motors with three sets of coils, and the test waveforms can be compared with the standard waveforms inside the instrument, and the test waveforms can be compared with the standard waveforms inside the instrument, and the test waveforms can also be compared with the standard waveforms without standard waveforms. The test waveforms can be compared with the internal standard waveforms of the instrument, and the consistency can also be compared among different coils without the need of standard waveforms.
| model number | TH2882AS-5 |
| Output pulse voltage | 500V-5000V ±5%, 100V step |
| Voltage control method | Normal: programmed for constant voltage when the test terminal is open: voltage is automatically controlled, independent of winding impedance |
| Test Range | Three-phase three-wire system Three-phase four-wire system |
| pulse energy (physics) | ≤250 milli-joules |
| Inductance Measurement Range | ≥200μH |
| monitor (computer) | 320 x 240 dot LCD screen, 240 x 200 dot waveform display |
| Display content | Setting parameters, standard and measured waveforms, measuring and comparing results |
| Waveform Sampling | Maximum 40 MSPS sample rate, 8-bit, 960 points |
| Input Impedance | 10MΩ (resistive voltage divider) |
| Measurement speed | Three-phase test: 2.0 times/second (waveform display OFF), 1.5 times/second (waveform display ON) |
| Display waveform measurement | Voltage, Time, Frequency |
| trigger method | Internal/manual (foot control)/external/bus |
| way of comparing | Area comparison, area difference comparison, corona discharge, phase difference comparison |
| Measurement repeatability | ±1% |
| discriminant output | PASS/FAIL Display, Alarm |
| memory (unit) | The instrument can internally store 60 groups of standard waveforms USB disk can store 500 groups of standard waveforms |
| connector | HANDLER, RS232C, GPIB (option). |
■ Pulse voltage output: 500V-5kV 100V step 3-phase possible
■ Inductance test range: ≥200μH
■ Test speed: 3-phase up to 2 times / sec (waveform OFF)
■ Maximum 40Msps sampling rate
■ Four waveform comparison methods
■ Three-phase coil impulse testing: three-phase three-wire three-phase four-wire
■ 320 x 240 dot matrix graphic LCD display
■ Chinese and English operation interface
■ Programmable multiple trigger methods
■ Voltage, time and frequency measurement functions
■ Handler, RS-232C, USB host, GPIB (option) interface
■ USB disk for storing 500 sets of standard waveforms
| standard equipment | |||||
| Accessory Name | model number | ||||
| Foot-activated switch | TH2881-001 | ||||
| High Voltage Test Lines | TH2882AS-01 | ||||
| optional | |||||
| Accessory Name | model number | ||||
| TH10001GPIB Interface Board | TH10001 | ||||
| TH2818-USB Main Control Board | TH26025 | ||||
Recommended
