PT-2740 AC/DC Current Probe (300kHz, 2A-250A)

PT-2740 Current Clamp Probe Abbreviated Description: Measures AC and DC current, matches any brand of oscilloscope.

Inquire about this product

model number	PT-2740
range (of scales or measuring equipment)	20 m V/ A	2 m V/ A
Current range	2 A- 60 A peak-to-peak	60 A- 500 A peak-to-peak
direct current	250 A
RMS	170 A
Output Signal Percentage Error	2 %
Frequency range (- 3 d B)	DC- 300 k Hz
phase shift	DC- 65 Hz: < 1 . 5 °	DC- 65 Hz: < 1 °
Load Impedance	≥1 MΩ and ≤100 p F
Insertion Impedance	0 . 01 Ω
noises	2 m V
Rise/fall time	1 . 2μs
operating voltage	600 Vrms max.
common-mode voltage (electronics)	600 Vrms max.
batteries	9 V alkaline battery (NEDA 1604 A, IEC 6 LR 61 ) / standby 144 hours
Low Battery Indication	When > 6.5 V, the LED is green. 5 V, the LED is green, the green light flashes and the battery needs to be replaced.
Overload indication	The red LED indicates that the measured current is too high and that the measuring range needs to be changed.
Mechanical indicators
operating temperature	0 ~+ 50 °C
temperature effect	Per 10 °C, < 0 . 2 %
Operating humidity	20 - 75 % RH
Maximum insertion	Diameter 11 mm
exports	2 m coaxial cable terminated with insulated BNC socket
weights	330 g (with battery)
sizes	231 * 36 * 67 mm