Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke 725 Multifunction Process Calibrator/Checker
Easy to use and powerful!
With the Fluke 725 Multifunction Process Instrument Calibrator, you can test and calibrate virtually any process parameter. It can measure and output milliamps, volts, temperature (RTD and thermocouple), frequency, ohms, and pressure signals (with an optional external pressure module). Need to calibrate a transmitter?The 725's split display allows simultaneous observation of inputs and outputs. For valve and I/P testing, mA can be output while pressure is being measured.The 725 has auto-stepping and auto-ramping for remote testing, and 25% stepping for fast linearity checking. When you get your hands on the Fluke 725, you can get right to work. The meter is very simple to control, with no menus and easy to operate. Its memory function makes setup quicker and it is very rugged.
Product Specification: Fluke 725 Multifunction Process Calibrator/Checker
| measurement accuracy | ||
| dc voltage | 30.000 V | 0.02%+ 2 counts (upper display) |
| 30.000 V | 0.02%+ 2 counts (lower display) | |
| 100.00 mV | 0.02% + 2 counts | |
| -10.00 mV to 75.00 mV | 0.025% + 1 count (via TC connector) | |
| direct current | 24.000 mA | 0.02% + 2 counts |
| resistive | 0.0 to 400.0 Ω | 0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire) |
| 401 to 1500 Ω | 0.5 Ω (4-wire), 1 Ω (2- and 3-wire) | |
| 1500 to 3200 Ω | 1 Ω (4-wire), 1.5 Ω (2- and 3-wire) | |
| frequency | 2.0 to 1000.0 CPM | 0.05% + 1 count |
| 1.0 to 1100.0 Hz | 0.05% + 1 count | |
| 1.00 to 10.00 kHz | 0.05% + 1 count | |
| (level of) sensitivity | 1 V Minimum Peak to Peak | |
| stresses | Accuracy is 0.025% of range when using any of the 29 pressure modules (see Pressure Modules in Options and Accessories for detailed specifications). The following modules are available: differential pressure, manometer, vacuum, absolute pressure, dual pressure, and high pressure. | |
| Output Accuracy | ||
| dc voltage | 100.00 mV | 0.02% + 2 counts |
| 10.000 V | 0.02% + 2 counts | |
| -10.00 mV to 75.00 mV | 0.025% + 1 count (via TC connector) | |
| direct current | 24.000 mA (output) | 0.02% + 2 counts |
| 24.000 mA (analog) | 0.02% + 2 counts | |
| resistive | 15.0 to 400.0 Ω | 0.15 Ω (excitation current 0.15 to 0.5 mA), 0.1 Ω (excitation current 0.5 to 2 mA) |
| 401 to 1500 Ω | 0.5 Ω (excitation current 0.05 to 0.8 mA) | |
| 1500 to 3200 Ω | 1 Ω (excitation current 0.05 to 0.4 mA) | |
| frequency | 2.0 to 1000.0 CPM | 0.05% |
| 1.0 to 1100.0 Hz | 0.05% | |
| 1.00 to 10.00 kHz | 0.25% | |
| waveform | 5 V p-p square wave, -0.1 V offset | |
| RTD and thermocouple | ||
| Measurement accuracy | NI-120 | 0.2 °C |
| PT-100 (385) | 0.33 °C | |
| PT-100 (393) | 0.3 °C | |
| PT-100 (JIS) | 0.3 °C | |
| PT-200 (385) | 0.2 °C | |
| PT-500 (385) | 0.3 °C | |
| PT-1000 (385) | 0.2 °C | |
| resolution (of a photo) | 0.1 °C | |
| J | 0.7 °C | |
| K | 0.8 °C | |
| T | 0.8 °C | |
| E | 0.7 °C | |
| R | 1.8 °C | |
| S | 1.5 °C | |
| B | 1.4 °C | |
| L | 0.7 °C | |
| U | 0.75 °C | |
| N | 0.9 °C | |
| resolution (of a photo) | J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F | |
| XK | 0.6 °C | |
| BP | 1.2 °C | |
| Output Accuracy | NI-120 | 0.2 °C |
| PT-100 (385) | 0.33 °C | |
| PT-100 (393) | 0.3 °C | |
| PT-100 (JIS) | 0.3 °C | |
| PT-200 (385) | 0.2 °C | |
| PT-500 (385) | 0.3 °C | |
| PT-1000 (385) | 0.2 °C | |
| resolution (of a photo) | 0.1 °C | |
| Accuracy is suitable for 4-wire measurements. | ||
| J | 0.7 °C | |
| K | 0.8 °C | |
| T | 0.8 °C | |
| E | 0.7 °C | |
| R | 1.4 °C | |
| S | 1.5 °C | |
| B | 1.4 °C | |
| L | 0.7 °C | |
| U | 0.75 °C | |
| N | 0.9 °C | |
| resolution (of a photo) | J, K, T, E, L, N, U: 0.1 °C, B, R, S: 1 °C | |
| XK | 0.6 °C | |
| BP | 1.2 °C | |
| technical specification | ||
| Slope Function | output function | Voltage, current, resistance, frequency, temperature |
| slope | Slow Linear Slope, Fast Linear Slope, 25% Stepper Slope | |
| Loop Power Function | input voltage | 24 V |
| accurate | 10% | |
| Maximum current | 22 mA, short circuit protected | |
| stepper function | output function | Voltage, current, resistance, frequency, temperature |
| stepper | Range of 25%, Range of 100% | |
| Environmental indicators | ||
| operating temperature | -10 °C to +55 °C | |
| storage temperature | -20 °C to 71 °C | |
| Working altitude | 3000 m | |
| Safety specifications | ||
| Institutional approval | EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 | |
| Mechanical and general specifications | ||
| sizes | 130 x 236 x 61 mm | |
| weights | 0.65 kg | |
| batteries | 4 AA alkaline batteries | |
| Battery replacement | Separate battery compartment for operation without breaking calibration seals | |
| Side Port Connections | Pressure module connector, also used as remote real-time programming interface | |
Model: Fluke 725 Multifunction Process Calibrator/Checker
Fluke 725
Chinese multifunctional process calibrator includes.
- Set of AC72 Alligator Clips
- Set of stackable test leads
- Set of TL 75 test leads
- user manual
