Fluke 773 Milliamp Process Clamp Meter

Fluke 773 mA Clamp Meter Features.

• Better 0.2% accuracy
• 0.01 mA Resolution and Sensitivity
• Measurement of 4 to 20 mA signals without "breaking the loop
• Measurement of mA signals of analog I/O of PLCs and control systems
• Dual backlit display showing mA measured value and percentage of 4 to 20 mA range
• Measuring spotlight illuminates hard-to-find wiring in dark chassis
• Detachable clamp meter with extension cord for measurements in tight spaces
• Measurement of 10 to 50 mA signals in old control systems using 99.9 mA range
• Automatically changes 4 to 20 mA output for remote testing
• Power-saving features such as auto shut-off and backlight timeout extend battery life
• "Hold function captures and displays changing measurements
• Measurement of 4 to 20 mA signals by means of the "Meter Pen" access loop measurement function
• Synchronized 24V loop power supply and measurement of loop mA signals to power and test transmissions
• Outputs a 4 to 20 mA signal source to test control system I/O or I/P.
• mA Output Linear Fade or 25% Step Output
• Automatically changes 4 to 20 mA output for remote testing
• DC voltage measurement to verify 24V power or voltage I/O signals
• Provides a DC voltage source to test input devices that can accept 1-5V or 0 to 10V signals
• The proportional mA output provides a continuous mA signal corresponding to the 4 to 20 mA signal measured by the mA clamp meter.
• Milliampere signals can be recorded to a separate recording device without disconnecting the loop
• Output mA signal allows logging digital multi-meters or other devices to record 4 to 20 mA signals without disconnecting the loop
• mA Input/Output: Measure mA signals non-breakingly with a clamp meter and output mA signal source
• Apply the mA input signal to a device and then measure its 4-20 mA output on a device such as a valve or mA isolator
• Voltage Output Linear Fading or 25% Step Outputs
• Automatically changes voltage output for remote testing