Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
● 30A, 5A, 0.5A total 3 ranges, 1 instrument can be 30A large current to small current waveform observations
:: Wide bandwidth: DC~50MHz
● High signal-to-noise ratio and 10x output rate: the oscilloscope's maximum voltage sensitivity is set to 1 mV/div, enabling 100 μA/div waveform display
● Direct input to the oscilloscope's BNC terminal*1
*1 If you connect the metal BNC terminal of this unit to the resin BNC terminal of the memory recorder, the resin terminal may be deformed or damaged. To avoid damage, connect the BNC terminal of the waveform observation device directly.
※Please use it on the main unit of a measuring instrument with a high input impedance of 1 MΩ or more.
Basic parameters (accuracy guaranteed for 1 year, adjusted accuracy guaranteed for 1 year)
| frequency bandwidth | DC ~ 50 MHz (-3dB) |
|---|---|
| rising time (10%~90%) |
Below 7.0 ns |
| latency | 30A range: 12 ns, 5A range: 12 ns, 0.5A range: 13 ns Delay time of the input signal relative to the rise time of 1ns |
| static (in a signal) | 75 μA rms or less (0.5 A range, 20 MHz bandwidth tester) |
| Maximum rated current | 30A range: 30 A rms, 5A range: 5 A rms, 0.5A range: 0.5 A rms (DC, sine wave regulation w/ frequency derating) |
| Maximum peak current | 30A range: ±50 A peak (max. within 2s duration), ±50 A peak (max. within 2s duration), ±50 A peak (max. within 2s duration), ±50 A peak (max. within 2s duration) 5A range: ±7.5 A peak, 0.5A range: ±0.75 A peak (< 10 MHz), ±0.3 A peak (≥ 10 MHz) |
| Amplitude accuracy | 30A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (≤ 10 Arms, DC, Sine wave 45 to 66 Hz, within maximum peak current of each range) 5A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (DC, sinusoidal 45-66 Hz, within maximum peak current of each range) 0.5A range: ±3.0% rdg. ±10 mV, (Typical) ±1.0% rdg. ±10 mV (DC, Sine wave 45-66 Hz, within maximum peak current of each range) |
| output rate | 30A range: 0.1 V/A, 5A range: 1 V/A, 0.5A range: 10 V/A, ※Tester outputs are internally terminated. |
| Measurable conductor diameter | φ 5 mm or less (insulated conductor) |
| power supply | Power supply via power supply 3269, probe power supply unit Z5021 |
| thread length | Sensor cable (between adapter box and sensor): 1.5 m, 1.5 m, 1.5 m, 1.5 m, 1.5 m Power cord: 1.0 m (Power plug: Remo/FFA.0S.304.CLAC37Y) |
| Volume and weight | Sensor section: 155W × 18H × 26D mm, adapter box section: 45W × 120H × 25D mm, terminal section: 29W × 83H × 40D mm, 370 g |
| attachment (email) | Instruction manual × 1, carrying bag × 1 |
Recommended
