Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Never miss contaminants that cause malfunctions, and increase cell capacity through high-speed testing.
● For battery production lines
● Equipped with BDD function (Micro Short Circuit Detection), which detects minor short circuits caused by foreign objects before shipment.
Stable insulation resistance test even in disturbed environments
:: High productivity at a reasonable price, high-speed inspection and compact size
:: Equipped with a contact check function that determines whether or not the object under test is making normal contact.
Basic parameters (accuracy guaranteed for 1 year)
| Key Features | Insulation resistance test BDD (Break Down Detect) Micro Short Circuit Detection Contact check function |
|---|---|
| output parameter | Output voltage: 25 V to 500 V, setting resolution 1 V Charge current (current limit function): 50 µA to 50 mA*1*2*3, minimum setting resolution 10 µA Short circuit current: 60 mA or less Discharge current: 40 mA or more*1 : When the current limit is set to 5.1 mA or more, if a capacitive load of about 50 μF or more is connected, measurement is not possible due to an error in the limit of the output generation section. ※2: If the current limit is set to 5.1 mA or more, if 20 V or more is not reached 200 ms after the measurement is started, the measurement is forced to end, and the measurement becomes possible after 1s. ※3 : If the current limit is set between 5.1 mA and 50.0 mA, the current is limited to 5 mA after the output voltage reaches the set voltage. |
| Measurement of partial parameters | Resistance value display range: 0.050 MΩ ~ 9999 MΩ Resistance measurement range: 2 MΩ, 20 MΩ, 200 MΩ, 2000 MΩ, AUTO |
| Basic precision | ±1.5% rdg.±2 dgt. 25 V ≦ V ＜ 100 V [0.05 MΩ ~ 2 MΩ], 100 V ≦ V ≦ 500 V [0.2 MΩ ~ 20 MΩ] |
| time parameter | Test time: 0.050 s～999.999 s, OFF Comparator delay: 0.001 s to 999.999 s, AUTO Display update speed: 1 PLC Sampling time: 1 PLC to 100 PLC |
| save function | Panel save function: 15 sets of measurement conditions can be saved. Measured value saving function: up to 999 measured values can be saved in the memory. |
| judgment function | Test Mode: Continuous Test, PASS STOP, FAIL STOP Comparator function: UPPER_FAIL Measured value > Upper limit value PASS Upper limit value ≧ Measured value ≧ Lower limit value LOWER_FAIL Measured value < lower limit value |
| Functions at a glance | BDD (Break Down Detect) Function: Micro Short Circuit Detection Function Contact check function: 2 Terminal electrostatic capacity measurement methods Automatic data output function: automatic output of measurement results through the communication interface at the end of the test Command monitoring function: screen display send/receive commands External I/O monitoring function: Screen display of output signal on/off and input signal Analog output function: Converts measured value to DC 0 ~ 4 V output*2 |
| connector | USB, LAN, RS-232C, EXT. I/O |
| Supply Voltage | AC 100 V to 240 V |
| power consumption | Approx. 20 VA※4
※4: When the power supply conditions are 220 V supply voltage, 50/60 Hz supply frequency, 200 V test voltage, 2 mA current limit, and load (1 GΩ resistor and 0.1 uF capacitor in parallel). |
| Maximum power rating | 100 VA |
| Volume and weight | 215W × 80H × 306.5 D mm, 2.8 kg |
| attachment (email) | Power cord, male connector for external I/O, connector for external I/O, anti-dusting Shroud, External I/O Interlock Release Fixture, Startup Guide |
