Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Performance Characteristics
- 7-inch 16: 9 TFT LCD display with 800 x 480 RGB resolution
- 0.05% basic measurement accuracy, fast test speed (75 times/second)
- 20Hz-500KHz test frequency, resolution 10 mHz
- Automatic level control ALC function for test voltage or current
- Frequency response curve plotting and analyzing function (ZC2868A does not have this function)
- 30 Ω, 100 Ω, 10 /100, 10 /CC four different signal source output impedance
- Built-in comparator, 10-speed sorting and counting function
- 10-point list scanning function
- Internal 100 sets of setup files to save or recall, USB flash drive 500 sets of test files to save or recall
- 0V, 1.5V and 2V internal DC bias voltage
- Selectable ±10V (±100mA) and 1 A internal DC bias source
- USB flash drive can support format FAT16, FAT32 file system
- Standard RS232C, HANDLER, USB HOST, headphone jack, optional GPIB, LAN interface
measurement function
|
Test Frequency
|
ZC2868A 20Hz-200kHz 10mHz Resolution
ZC2867 20Hz-300kHz 10mHz resolution ZC2866 20Hz-500kHz 10mHz resolution |
||||
| test parameter | |Z|, |Y|, C, L, X, B, R, G, D, Q, θ ,DCR | ||||
| Basic Measurement Accuracy | 0.05% | ||||
| equivalent circuit | Series, Parallel | ||||
| math function | Value deviation, Percentage deviation | ||||
| Measurement range | Auto, Hold, Manual Selection | ||||
| trigger method | Internal, Manual, External, Bus | ||||
| Measurement speed (≥1kHz) | Fast: 75 cycles/sec, Medium: 12 cycles/sec, Slow: 3 cycles/sec | ||||
| Average number of times | 1-255 | ||||
| latency | 0-60s, in 1ms steps | ||||
| calibration function | Open / Short / Load | ||||
| Test Side Configuration | five extremes | ||||
| List Scanning | 10-point list scanning function | ||||
| Display mode | Direct reading, Δ, Δ%, V/I (measured voltage/current monitoring) | ||||
| test signal | |||||
| Output Impedance | 30 Ω, 100 Ω, 10 /100, 10 /CC selectable | ||||
| Test Signal Level | Normal: 5 mV-2V Accuracy: 10% in 1 mV steps
Constant level: 10 mV-1 V Accuracy: 5% in 1 mV steps |
||||
| DC Bias Source | Internal 0V, 1.5V, 2V, Accuracy: 1% | ||||
| Display range | |||||
| |Z|, R, X | 0.01mΩ - 99.9999 MΩ | ||||
| DCR | 0.01 mΩ - 99.9999 MΩ | ||||
| |Y|, G, B | 0.00001µS - 99.9999S | ||||
| C | 0.00001pF - 9.9999F | ||||
| L | 0.00001µH - 9999.99H | ||||
| D | 0.00001 - 9.9999 | ||||
| Q | 0.00001 - 9999.9 | ||||
| θ (DEG) | -179.999º - 179.999º | ||||
| θ (RAD) | -3.14159 - 3.14159 | ||||
| General specifications | |||||
| volumetric | 398mm×129mm×370mm | ||||
| weights | Approx. 9kg | ||||
