Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
| model number | DQM-14170 | Probe Type | U, I | |
| Input Connector | Safety BNC | Probe Calibration | Reset, Uncalibrated | |
| Number of channels | 4 channels | Probe Ratio | Voltage probe:Customized ratio can be set in the range of 1e-6~1e+6 Current Probe:Customized ratio can be set in the range of 1e-6V/A~1e+6V/A |
|
| weights | 约0.350kg | |||
| electrical isolation | incommunicado | |||
| Maximum sampling rate | 10MS/s | |||
| bandwidths | DC-5MHz | Maximum Input Voltage | Direct input 200V (DC+ACpeak) | |
| ADC Resolution | 16bits | maximum permissible common-mode voltage (electronics) |
Direct input: 42V (DC+ACpeak), CATII 30V | |
| 耦合方式 | DC | |||
| voltage sag straight ahead |
0.01V/div~20V/div (1-2-5 steps) 0.01V/div, 0.02V/div, 0.05V/div, 0.1V/div, 0.2V/div, 0.5V/div, 1V/div, 2V/div, 5V/div, 10V/div, 20V/div Note: Uses 1:1 attenuation probe |
Input Impedance | 1MΩ，约30pF | |
| Input coupling | DC | |||
| vertical axis[1] flow accuracy |
Range error: 10mV/div~20V/div: ± (0.3% of 10div) Gain error: ± 0.15% of reading |
bandwidth limit | off，10Hz/5kHz/150kHz/1.5MHz、数字滤波器 |
Recommended
