GSP-8000 Series Spectrum Analyzer

The GSP-8000 series is a new basic spectrum analyzer from Goodwell, offering three frequency ranges, 8.0GHz, 3.8GHz and 1.8GHz, which are suitable for educational research, R&D verification, and RF product testing in the production/development stage. The entire series offers 1Hz ~ 1MHz resolution bandwidth (RBW), 10Hz ~ 3MHz video bandwidth (BW), -104dBc/Hz phase noise, 20d8 preamplifiers, and the lowest noise floor up to -160dBm/Hz (typical).

For measurement applications, the GSP-8000 has built-in Time Spec function, AM/FM signal demodulation function, Channel PowerMeasurement function, Pass-fail function, etc. The TimeSpec function can display the correlation between power, frequency and time at the same time; ACPR/OCBW/CHPW test can be used to test neighboring channels, power consumption bandwidth ratio, channel power, etc.; Pass-Fail function can be used to determine whether the signal is within the set range; users can use these functions to carry out the measurement; users can use these functions for the neighboring channels, power consumption bandwidth ratio, channel power. The ACPR/OCBW/CHPW test can be used to test neighboring channels, power occupancy bandwidth ratio, channel power and other functions; Pass-Fail function can be used to determine whether the signal is within the set range; users can use these functions to carry out a wide range of measurement applications.

To make signals easier to observe during testing, the GSP-8000 utilizes a large 10.4" TFT LCD screen that supports XGA (1024x768) resolution. In terms of communication interfaces, the GSP-8000 provides both USB and LAN interfaces. The USB Host allows users to quickly capture the stored files after measurement, while the USB Device and LAN interfaces allow users to control the instrument via proprietary PC software or design the desired program using the corresponding instruction set.