Ultra-thin jaws with a minimum cross-section of 11mm, designed for easy access to narrow areas of the cable.
-AC-specific, up to 2000A
-Measurement of AC voltage, resistance, etc.
-Wireless support! Measured values can be transferred to a smartphone or tablet device (when wireless adapter Z3210 is installed)
-Wireless support! Measured values can be transferred to a smartphone or tablet device (when wireless adapter Z3210 is installed)
-Transfer of measurement data directly to a table created using Excel® (when wireless adapter Z3210 is installed)
-Harmonic analysis from 1st to 30th harmonic through software GENNECT Cross (when wireless adapter Z3210 is installed)
Product Feature Name
CAT IV 600 V, CAT III 1000 V
(CAT III 2000 V, CAT IV 1000 V (when using P2000)
Basic parameters (accuracy guaranteed for 1 year, adjusted accuracy guaranteed for 1 year)
| AC current range | 60.00 A to 2000 A, 3 ranges (45 to 1 kHz, true RMS rectifier), Basic accuracy 45 - 66 Hz : ±1.5% rdg. ±0.08 A (range 60 A) |
|---|---|
| crest factor | Range 60.00 A: 2.5 (over 50.00 A is 60.00 A or less) ~ Range 2000 A: 1.5 (2000 A or less) |
| DC voltage range | 600.0 mV to 1000 V (600.0 V to 2000 V when using P2000) |
| AC Voltage Range | 6.000 V to 1000 V, 4 ranges (15 to 1 kHz, true RMS rectification), basic accuracy 45 - 66 Hz : ±0.9% rdg. ±0.003 V (at 6V) |
| AC + DC voltage range | 6.000 V to 1000 V, 4 ranges, basic accuracy DC, 45 - 66 Hz : ±1.0% rdg. ±0.013 V (at 6V) |
| Resistance range | 600.0 Ω to 6.000 MΩ, 5 ranges, basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω) |
| electrostatic capacitance range | 1.000 μF to 1000 μF, 4 ranges, basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF) |
| frequency range | Voltage: 9.999 Hz to 999.9 Hz, 3 ranges, Current: 99.99 Hz, 999.9 Hz, 2 ranges, Basic accuracy: ±0.1% rdg. ±0.01 Hz (at 99.99 Hz) |
| Temperature (K) | -40.0 to 400.0 ˚C, Accuracy: ±0.5% rdg. ±3.0 ˚C + Temperature Probe Accuracy |
| harmonic (wave with frequency an integer multiple of the fundamental) | Harmonic level/content/total harmonic distortion up to the 30th order in the current can be measured [when Z3210 is installed]. * :: Can be displayed using application software (GENNECT Cross) |
| Other Functions | Conductivity check, diode check, AC/DC auto judgment function (voltage only), max/min/average/peak max/peak min display, low-pass filtering function, display value hold, backlight, auto power saving, beep, zero setting, etc. |
| Dust and water resistance | IP20 (Measurement of voltages in a completely dry state or currents in dangerously energized conductors) IP50 (Measurement of resistance or current of insulated conductors when stored or in a completely dry state) (Measurement in wet conditions is prohibited) |
| power supply | Alkaline Battery No. 7 (LR03) × 2 Approx. 48h (when Z3210 is not installed), approx. 24h (when Z3210 is installed and communicating wirelessly) Other conditions: AC 100 A measurement, LCD backlight OFF, 23°C reference value |
| Measurable conductor diameter | φ 55 mm, Jaw size: 82 W × 11 D mm (D dimension is within 44 mm from the front of the jaw) |
| Minimum size of jaw cross-section | 11 mm (this dimension is within 44 mm of the front of the jaws) |
| Volume and weight | 65 W × 247 H × 35 D mm, 300 g |
| attachment (email) | Test Lead L9300 ×1, Carrying Case C0203 ×1, Alkaline Battery No. 7 (LR03) ×2, Instruction Manual ×2, Precautions for Use ×1 |
Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.









