:: For short-time measurements in locations where there are no temperature variations
● Confirmation of measured values on site by means of a display unit
● Four types of outputs can be made to a memory recorder or data acquisition instrument depending on the application (used with a display unit) Waveform output, RMS output, peak output, and frequency output.
Basic parameters (accuracy guaranteed for 3 years, adjusted accuracy guaranteed for 3 years)
Rated measuring current | AC/DC 600 A |
---|---|
Maximum Input Current | 600 A (有频率降额) |
maximum peak value | 900 A peak |
frequency bandwidth | DC~10 kHz (-3dB) |
Phase Representation Accuracy | ±1.8 deg. (DC < f ≤ 66 Hz) |
output rate | 1 mV/A |
Maximum rated voltage to ground | AC/DC 600 V (CAT IV) AC/DC 1000 V (CAT III) |
Measurable conductor diameter | φ 33 mm or less |
output connector | HIOKI PL14 |
Temperature range | -25℃~65℃ |
Dust and water resistance* | 钳口 , 障壁 :IP50 / 手持部分 :IP54 ( 仅限测量绝缘导体时,不要在潮湿的状态下进行测量 ) |
Volume and weight | 64W × 160H × 34D mm, 320 g, 线长2.5 m |
attachment (email) | not have |
*具有防水性使得测量能够进行,在本机湿润的状态下测量带电部的话,触电的危险性会提高