Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
● Insulation (500/1000V) / voltage withstand (transformer capacity 100VA) continuous test
:: Continuous insulation withstand voltage and withstand voltage insulation tests can be performed in automatic test mode.
:: Combination with security testing software 9267
● Save test conditions in withstand voltage mode, insulation mode, and various test conditions up to 8 channels.
● Generate the correct test voltage that is not dependent on the power supply voltage according to the PWM method.
For contact checking, it is necessary to purchase a separate high voltage test lead 9615.
[Voltage withstand test]
| output voltage | AC0.2～5.00kV |
|---|---|
| Voltage setting method | Digital setting, setting resolution: 0.01kV |
| AC Waveform/Frequency | Sine wave (distortion rate below 5% without load), switchable at 50/60Hz |
| Current measurement range | 0.01mA～20.0mA, true RMS display (digital) |
| measuring range | 10mA, resolution: 0.01mA / 100mA, resolution: 0.1mA |
| voltmeter | Accuracy: ±1.5%rdg. (above 1000V), ±15V (below 1000V) (RMS display) |
| Method of Determination | Window comparison method (digital setting) |
[Insulation resistance test]
| rated voltage | DC500V, DC1000V |
|---|---|
| No load voltage | 1～1.2 times of rated voltage |
| Rated measuring current | 1～1.2mA, short-circuit current: 4～5mA (500V)/2～3mA (1000V) |
| Measuring range/accuracy | 0.5MΩ～999MΩ(5000V)/1MΩ～999MΩ(1000V): ±4%rdg. 1000 MΩ to 2000 MΩ: ±8%rdg. |
| Method of determination | Window comparison method (digital setting) |
[Timer] *The actual test will cause the timer setting time to be different due to different loads.
| Setting range | 0.3 to 999s |
|---|---|
| Ramp/Delay | Test voltage Ramp up, down, insulation resistance test delay: 0.1 ~ 99.9s |
| functionality | Voltage withstand, 8 types of memory each in the test content of insulation resistance, hold, buzzer, check contact function (voltage withstand, insulation resistance) |
| monitoring function | Output voltage, detection current, insulation resistance. Monitoring cycle: more than 4 times/s |
| power supply | AC100～240V(50/60Hz), 200VA max. |
| Volume/Weight | 320W×155H×395Dmm, 15kg |
| attachment (email) | 9615 High Voltage Test Lead (High Voltage Lead and Loop, 1 each), Power Cord × 1, Instruction Manual × 1, Anti-shedding Stopper × 1 |
