Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
brief introduction
ZC2683A Insulation Resistance Tester is a measuring instrument to measure the insulation performance of electronic components, dielectric materials, equipment and wires and cables. The instrument is controlled by a single-chip microprocessor, easy to operate and fully functional. It is characterized by wide measuring voltage range and fast speed. The instrument adopts 24-bit color 4.3-inch color LCD screen with touch function, which is easy to operate and fast to test, and can intuitively display the output voltage, measurement range resistance, insulation resistance of the measured object and other parameters. Instrument with automatic range or lock, sorting output and external trigger input interface and other functions, so that the test is more direct, convenient and reliable. This machine has USB interface, the panel function can be completely controlled by the computer, the test results can also be sent back to the computer through the USB interface to save, or the data directly into the U disk to save.
Performance Characteristics
- Chinese and English operation interface
- Insulation resistance, leakage current dual display
- zeroing function
- Contact check function for capacitive materials
- Programmable sequential test mode
- Quick test: 30ms
- 6 ranges, manual or automatic mode
- Four-step comparison function: three passes, one fails
- Measurement result data can be saved on a USB flash drive, and the system firmware can be upgraded via the USB flash drive.
- Foot switch trigger function (option)
- Supports MODBUS protocol
Technical indicators
| model number | ZC2683A | |
| resistive | Measurement range | 100KΩ-10TΩ |
| accurate | Voltage ≥10V and 1>10nA ±2% | |
|
amps |
Test Range |
Range 1: 100uA~1mA, input internal resistance 10kΩ |
| Range 2: 10uA~100uA, input internal resistance 10kΩ | ||
| Range 3: 1uA~10uA, input internal resistance 10kΩ | ||
| Range 4: 100nA~1uA, input internal resistance 10kΩ | ||
| Range 5: 10nA~100nA, input internal resistance 1MΩ | ||
| Range 6: 1nA~10nA, input internal resistance 1MΩ | ||
| input voltage | Test Range | 10V-1000V |
| accurate | Voltage ≥10V 1% ±1V | |
| Current Limit | 10mA | |
| switchgear | Turn on or off manually on the front panel, or via built-in timer control or remote control | |
| charging time | 0~999s, programmable | |
| Measurement delay | 0~999s, programmable | |
| test speed | Fast: single measurement time ≤100ms/time Slow: single measurement time ≤500ms/time | |
| Comparator Functions | Fourth gear: three passes and one fails | |
| Measurement range | Automatic, Hold | |
| memory (unit) | External USB flash drive | |
| standard interface | RS232C, HANDLER | |
| power wastage | <50VA | |
| volumetric | 270mm(W)*110mm(H)*370mm(D) | |
| weights | 4kg | |
