Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke 718 Series Pressure Calibrators| Pressure Calibrators
Comprehensive solutions for pressure calibration
The Fluke 718 Pressure Calibrator/Pressure Verifier Series, which includes four models, is a comprehensive pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is one-third the size of comparable instruments and weighs only 1 kg (2 lbs). The Pressure Calibrator's unique, easy-to-clean pump not only helps protect the pump from damage, but also features no-disassembly maintenance, even on the job site.
Product Specifications: Fluke 718 Series Pressure Calibrators| Pressure Calibrators
| technical specification | |
| Fluke 718 Series | |
| Pressure measurement | (internal sensors) |
| precision | 0.05% at full scale |
| functionality | Zero, Min/Max, Hold, Damping |
| Dry, non-corrosive air only | |
| Fluke 718 1G | |
| range (of scales or measuring equipment) | -1 psi to +1 psi (-6.89 kPa to 6.89 kPa) |
| resolution (of a photo) | 0.0001 psi, 0.0001 kPa |
| overpressurization | 5 x full scale |
| functionality | Zero, Min, Max, Hold, Damping |
| Fluke 718 30G | |
| range (of scales or measuring equipment) | -12 psi to 30 psi, (-85 to 206.84 kPa) |
| resolution (of a photo) | 0.001 psi, 0.01 kPa |
| overpressurization | 5 x full scale |
| functionality | Zero, Min, Max, Hold, Damping |
| Fluke 718 100G | |
| range (of scales or measuring equipment) | -12 psi to 100 psi, (-85 to 689.48 kPa) |
| resolution (of a photo) | 0.01 psi, 0.01 kPa |
| overpressurization | 2 x full scale |
| functionality | Zero, Min, Max, Hold, Damping |
| Fluke 718 300G | |
| range (of scales or measuring equipment) | -12 psi to 300 psi, (-83 to 2068 kPa) |
| resolution (of a photo) | 0.01 psi, 0.1 kPa |
| overpressurization | 375 psi, 25 bar |
| functionality | Zero, Min, Max, Hold, Damping |
| Fluke 718 Series with 700 Series Pressure Module | |
| range (of scales or measuring equipment) | 29 pressure modules with pressure calibration ranges from 0 to 1 inH20 to 10,000 psi. overpressure protection in accordance with pressure module specifications. |
| resolution (of a photo) | Compliance with pressure module indicators |
| precision | Up to 0.025% fullness per pressure module specifications |
| functionality | Zero, Min, Max, Hold, Damping |
| Media compatibility in accordance with the technical specifications of the pressure module | |
| Fluke 718 Series with Built-in Pump | |
| range (of scales or measuring equipment) | -12 psi to full Supported pressure units: psi, inH20 (4 °C), inH20 (20 °C), cmH20 (4 °C), cmH20 (20 °C), bar, kPa, inHg, mmHg, kg/cm |
| circuit power | DC 24 V |
| precision | ±10% |
| Drive; 20 mA at >6.8 V battery, 1000 Ω; 700 Ω at 5.8 to 6.8 V battery | |
| mA Measurement | |
| range (of scales or measuring equipment) | 0 mA to 24 mA |
| resolution (of a photo) | 0.001 mA |
| precision | 0.015% + 1 count |
| General technical specifications | |
| Maximum voltage | 30 volts (non-operating) |
| temp | -40 °C to 60 °C |
| operating temperature | -10 °C to 55 °C |
| relative humidity | 95% (10 °C to 30 °C); 75% (30 °C to 40 °C); 45% (40 °C to 50 °C); 35% (50 °C to 55 °C) |
| Working altitude | 3,000 meters (max) |
| under attack | 1 meter drop test |
| vibratory | Random, 2 g, 5 Hz to 500 Hz |
| security level | CAN/CSA C22.2 No.1010.1: 1992 |
| Electromagnetic Compatibility (EMC) | EN50082-1: 1992 and EN55022: 1994 Class B |
| sizes | 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in) |
| weights | 992 g (35 oz) |
| Electricity, battery life: | 9V ANSI/NEDA 1604A or IEC 6LR619V alkaline battery; 718 series with two batteries |
| Battery life | 4 to 20 hours (typical), depending on function used |
| warranty period | Three years (one year warranty on the pressure pump in Fluke 718) |
| monitor | LCD display, 5-digit, synchronized pressure and current display |
| Suitable for measuring non-corrosive gases | |
Model: Fluke 718 Series Pressure Calibrator| Pressure Calibrators
Fluke 718 1G
Pressure Calibrator -1 to 1 PSI (-6.89 to 6.89 k Pa)
All models include.
- Yellow jacket with test line storage
- Instruction manuals (14 languages)
- Test Leads and Alligator Clips
- Two 9V alkaline batteries
Fluke 718 30G
Pressure Calibrator -12 PSI to 30 PSI (-85 to 206.84 kPa)
Contains:
- Yellow jacket with test line storage
- Instruction manuals (14 languages)
- Test Leads and Alligator Clips
- Two 9V alkaline batteries
- NIST - Traceable Calibration Reports and Data
Fluke 718 100G
Pressure Calibrator -12 PSI to 100 PSI (-85 to 689.48 kPa)
Contains:
- Yellow jacket with test line storage
- Instruction manuals (14 languages)
- Test Leads and Alligator Clips
- Two 9V alkaline batteries
- NIST - Traceable Calibration Reports and Data
Fluke 718 300G
Pressure Calibrator -12 PSI to 300 PSI (-83 to 2068 kPa)
Contains:
- Yellow jacket with test line storage
- Instruction manuals (14 languages)
- Test Leads and Alligator Clips
- Two 9V alkaline batteries
- NIST - Traceable Calibration Reports and Data
Recommended
