Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
AFG-2100/2000 Series Arbitrary Waveform Signal Generator is a DDS technology based, covering sine, square, triangle, noise waveforms and arbitrary waveforms with a sampling rate of 20MSa/s. The resolution of 0.1Hz and the adjustable duty cycle function of square wave (pulse wave) of 1%~99% greatly extends its application range.
The AFG-2100/2000 series consists of six models with three frequency bands of 5MHz/12MHz/25MHz. In addition, the AFG-2100 series provides AM/FM/FSK modulation, scanning, and frequency counter functions. The parameter setting adopts a fully digital operation design, and the 3.5'' tri-color LCD display can clearly show the contents of the set parameters. All series are equipped with USB Device interface, users can not only remote control, but also import waveform data from PC.
Built-in arbitrary wave function
The AFG-2100/2000 series provides an arbitrary waveform editing function with 20MSa/s sampling rate, 10-bit vertical resolution, and 4k-point recording length. Users can perform arbitrary waveform editing through panel settings or using proprietary waveform editing software.
Amplitude and DC bias display function
In addition to setting parameters, the AFG-2100/2000 displays voltage magnitude and DC bias readings on the LCD screen. Three amplitude units, Vpp, Vrms and dBm, are available for user selection and substitution.
Wide square wave adjustable duty cycle
The square wave duty cycle provided by the AFG-2100/2000 series can be set from 1% to 99%. using this function, the pulse waveform can be simulated as a burst or transient signal.
AM/FM/FSK, Sweep, Counter functions (AFG-2100 series only)
The AFG-2100 series has built-in AM/FM/FSK modulation, waveform scanning and frequency counter functions. 150MHz frequency counting saves the cost of purchasing additional counters.
Fully digitalized keypad design
The all-digital keypad design of the AFG-2100/2000 series improves the uncertainty of traditional signal generator settings and significantly increases the accuracy of the waveform output. 3.5'' LCD screen makes it easy for the user to observe the parameter changes during the adjustment process.
Proprietary Arbitrary Wave Editing Software
AFG-2100/2000 provides a set of free arbitrary waveform editing software. After completing the desired waveform editing on a PC, the data can be loaded into the AFG-2100/2000 for output simply through the USB port.
Signal Source AFG-2000 Series Introductionhttp://v.youku.com/v_show/id_XNjA0ODgwODMy.html?spm=a2hzp.8253869.0.0
Quick Selection
| model number | frequency range | sampling rate | resolution (of a photo) | Waveform length | channel number |
| AFG-2225 | 1uHz-25MHz | 120MSa/s | 10bits | 4K | 2 |
| AFG-2005 | 0.1Hz-5MHz | 20MSa/s | 10bits | 4K | 1 |
| Detailed specifications | ||||||
| AFG-2105 | AFG-2112 | AFG-2125 | AFG-2005 | AFG-2012 | AFG-2025 | |
| waveform | ||||||
| Sine/Square/Triangle | ||||||
| Arbitrary wave function | ||||||
| sampling rate | 20MSa/s | |||||
| reconstruction rate | 10MHz | |||||
| Record length | 4k point | |||||
| vertical resolution | 10-bit | |||||
| frequency characteristic | ||||||
| Range Sine/Square | 0.1Hz~5MHz | 0.1Hz~12MHz | 0.1Hz~25MHz | 0.1Hz~5MHz | 0.1Hz~12MHz | 0.1Hz~25MHz |
| Triangle / Ramp Wave | 1MHz | |||||
| resolution (of a photo) | 0.1Hz | |||||
| degree of stability | ±20ppm | |||||
| aging rate | ±1ppm/year | |||||
| error tolerance | <10mHz | |||||
| Output Characteristics | ||||||
| Amplitude Range | ≤20MHz: 1mVpp~10Vpp (connected to 50Ω); 2mVpp~20Vpp (open circuit); ≤25MHz: 1mVpp~5Vpp (connected to 50Ω); 2mVpp~10Vpp (open circuit) | |||||
| precision | ±1% ±1mVpp of set value; (1kHz, >10mVpp) | |||||
| resolution (of a photo) | 1mV or 3 bits | |||||
| flatness | ±1% (0.1dB) ≤100kHz; ±3% (0.3dB) ≤5MHz; ±5% (0.4dB) ≤12MHz; ±20% (2dB) ≤20MHz; ±5% (0.4dB) ≤25MHz; (Sine wave 1kHz) | |||||
| unit (of measure) | Vpp, Vrms, dBm | |||||
| DC Offset Range | ±5Vpk ac+dc (connected to 50Ω); ±10Vpk ac+dc (open) | |||||
| precision | 1% of setting value + 2mV + 0.5% of amplitude value | |||||
| Waveform Output Impedance | 50Ω typical (fixed); >10MΩ (output off) | |||||
| safeguard | Short-circuit protection; overload relay automatically disables outputs | |||||
| SYNC Output Parity | TTL-compatible into＞1kΩ | |||||
| (electrical) impedance | 50Ω Normal | |||||
| Rise/fall time | ≤25ns | |||||
| Sine Wave Characteristics | ||||||
| harmonic distortion | -55dBc DC~1MHz, Ampl＞1Vpp; 45dBc 1MHz~5MHz, Ampl＞1Vpp; -30dBc 5MHz~20MHz, Ampl＞1Vpp | |||||
| square wave characteristic | ||||||
| Rise/fall time | ≤25ns at maximum output (with 50Ω load) | |||||
| Excessive signals | <5% | |||||
| asymmetry | Cycle of 1%+1ns | |||||
| Adjustable Duty Cycle | 1% ~ 99% ≤ 100kHz; 10% ~ 90% ≤ 2MHz; 20.0% ~ 80.0% ≤ 5MHz; 40.0% ~ 60.0% ≤ 10MHz; 50% ≤ 25MHz; (resolution of the full band 1%) | |||||
| Triangular Wave Characteristics | ||||||
| linearity | <0.1% of peak output | |||||
| Adjustable symmetry | 0%~100% (0.1% resolution) | |||||
| AM modulation | ||||||
| carrier waveform | Sine, Square, Triangle | -- | ||||
| Modulated waveforms | Sine, Square, Triangle | |||||
| frequency modulation | 2mHz~20kHz(Int); DC~20kHz(Ext) | |||||
| (of a speech etc) profundity | 0%~120.0% | |||||
| FM modulation | ||||||
| carrier waveform | Sine, Square, Triangle | -- | ||||
| Modulated waveforms | Sine, Square, Triangle | |||||
| frequency modulation | 2mHz~20kHz(Int); DC~20kHz(Ext) | |||||
| aberration | DC~Maximum Frequency | |||||
| FSK | ||||||
| carrier waveform | Sine, Square, Triangle | -- | ||||
| Modulated waveforms | 50% Duty Cycle Square Wave | |||||
| internal frequency | 2mHz~20kHz | |||||
| frequency range | 0.1Hz~Maximum Frequency | |||||
| scanning | ||||||
| scanning time | 1ms~500s | -- | ||||
| Waveform type | Sine, Square, Triangle | |||||
| Scanning Patterns | Linear or logarithmic | |||||
| Start/cutoff frequency | 0.1Hz~Maximum Frequency | |||||
| frequency counter | ||||||
| realm | 5Hz~150MHz | -- | ||||
| precision | Time base accuracy ±1count | |||||
| time base | ±20ppm (23℃±5℃), warm-up 30 minutes | |||||
| resolution (of a photo) | Maximum resolution: 100nHz for 1Hz; 0.1Hz for 100MHz | |||||
| Input Impedance | 1MΩ/150pf | |||||
| (level of) sensitivity | ≤35mVrms(5Hz~100MHz); ≤45mVrms(100MHz~150MHz) | |||||
| Storage/Recall | ||||||
| 10 groups of storage settings | ||||||
| connector | ||||||
| USB(Devices) | ||||||
| power supply | ||||||
| AC 100~240V, 50~60Hz | ||||||
| power consumption | ||||||
| 65VA | ||||||
| Size & Weight | ||||||
| 266(W)×107(H)×293(D)mm; approx. 3.2kg | 266(W)×107(H)×293(D)mm; Approx. 3.1kg | |||||
Standard Accessories
Use CD x 1
Quickbooks x 1
Power cord x 1
GTL-101 test line x 1 (AFG-2000 series)
GTL-101 test line x 2 (AFG-2100 series)
optional
GTL-242 USB cable, USB 2.0 Type A-B, 4P (optional)
Ordering Information
AFG-2100 Series Arbitrary Waveform Signal Generator
AFG-2000 Series Arbitrary Waveform Signal Generator
attachment (email)
AFG-2100 Series - GTL-101×2, Instruction Manual×1, Power Cord×1
AFG-2000 Series - GTL-101×1, Instruction Manual×1, Power Cord×1
