Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke Networks LinkIQ™ Cable/Network Tester
The LinkIQ™ Cable/Network Tester is a trusted solution for verifying cable performance at rates up to 10G and resolving network connectivity issues.
LinkIQ™ verifies cable performance using frequency-based measurements to calculate the maximum bandwidth (10BASE-T to 10GBASE-T) to ensure that the tested link meets performance requirements.
LinkIQ™ also provides recent switch diagnostic information including nominal data rate, switch name, port number, and VLAN information, as well as PoE testing and load testing up to Level 8 (90W).
Additional features include a cable tone generator, port indicator flashing, remote office locator, and the ability to manage test results via a LinkWare PC.
Includes LinkIQ™ mainframe, Remote ID #1, RJ45-RJ45 patch cable, AC charger, RJ45/11 universal connector and carrying case.
Product Specification: Fluke Networks LinkIQ™ Cable/Network Tester
| functionality | instructions |
| User Interface (UI) Supported Languages | English (SW v1.0) |
| weights | 1 lbs 6 oz (624g) |
| batteries | Type: Lithium battery, 3.6 V, 6400 mAh Endurance: 8 hours (standard) Charging time: 4.5 hours Charging temperature range: 0 °C to +40 °C |
| power adapter | Input: 100 - 240 VAC ±10%, 50/60Hz Output: 15 VDC, 2 A maximum Category II |
| Host Interface | USB Type C |
| monitor | 800 x 480 capacitive multi-touch color screen |
| sizes | 8.5 in x 4.5 in |
| operating temperature | 0 °C to 45 °C |
| storage temperature | -10 °C to +60 °C |
| Operating relative humidity | 0 % - 90 % (0°C - 35°C) 0 % - 70 % (35°C - 45°C) |
| Working altitude | 4000 m ( (3200 m with AC power adapter) |
| vibratory | Random, 2 g, 5 Hz-500 Hz |
| fall | 1 meter drop, 6 sides |
Active Network Diagnostics
| functionality | instructions |
| diagnostic protocol | Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulse (FLP) |
| Diagnostic information for recent equipment (where available through diagnostic protocols) |
Switch Name port number VLAN Name nominal data rate Nominal Duplex |
| Power over Ethernet compatibility | IEEE 802.3af/at/bt (SW v1.0) Hardware negotiation with the characteristic resistor Software negotiation with LLDP/CDP |
| Power over Ethernet Diagnostic Information | Nominal Power Rating (0 to 8) Nominal available power wire bonding Single-feature and dual-feature diagnostic information |
| Power over Ethernet Measurements | Load Voltage (V) Load Power (W) |
| Port Indicator Lights Blinking | Indicator light of the connected port is blinking |
Cable Test Specifications
| functionality | instructions |
| test port | Shielded 8-pin modular jack for 8-pin modular (RJ45) plug. |
| Debugging of automated tests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, wiring diagrams only. Test speed: 6 seconds, for lengths < 70 md |
| Cable Type | Balanced Twisted Pair Cabling unshielded twisted pair Shielded Twisted Pair 2 and/or 4 pairs |
| Wiring diagram test only | Record wiring diagrams Length of each pair Diagnostic split-line pairs User selectable T568A or T568B User selectable crossover settings (straight, half, full) Test speed: 1 sec. for lengths . |
| Length (maximum) | 305 m (1000 ft) |
| Nominal Velocity of Propagation (NVP) | User settable |
| tone generator | Generates digital audio compatible with Fluke Networks IntelliTone probes. Generates analog audio compatible with generic analog probes. |
| Remote ID Locator | Use Remote ID terminals to identify up to 7 unique ports or office outlets |
Model: Fluke Networks LinkIQ™ Cable/Network Tester
LIQ-100
LIQ-100 LinkIQ Cable/Network Tester
Attached:
- LinkIQ™ Host
- Remote ID #1
- RJ45-RJ45 Patch Cord
- AC charger
- RJ45/11 Universal Connector
- grip
Recommended
